A question of scale?
Re: A question of scale?
I don’t have a preference really, and haven’t given it too much thought, except when it comes to 1:72. There are some really nice kits out there in 1:72, which I’d like to build, but don’t because that’s just a shade too small for me. I feel like I don’t have a precise enough or gentle enough touch for some of those 1:72 aircraft. Not all of them though. I have a 1:72 Warrhog that’ll be fine, it’s a big airplane. That I can probably do. But a 1:72 109, I don’t think I could make that happen.
Kenny X
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Re: A question of scale?
My first model was in 1965, it was a 1/72 scale Revell Corsair.
I kept to that scale for a while, because of all the fighters available in 1/72.
I have looked at possibly changing scales a few times over the decades, especially when 1/48 got more options for available aircraft models.
But, I stayed with 1/72 up to today for the same reason that I always built and drove the same Car Company's hot rods. It is hard to get rid of all of the spares for one make of car to switch makes, especially if you have some really cool and rare parts.
The same thing would have happened if I "jumped" up to 1/48 or 1/32. Only some little bits of the decals I have would possibly be of any use in a different scale, spares box and vehicles, weapons packs,,,,etc, etc,,,,,all of no use in a different scale.
A lot of people are convinced that their viewers are more impressed with the large models, and I believe that is true to an extant.
But, I revel in the idea that people say things like "you built that itty bitty thing?" when they see a 1/72 jeep, jet, bearcat, or people walking around on a flight deck base.
I kept to that scale for a while, because of all the fighters available in 1/72.
I have looked at possibly changing scales a few times over the decades, especially when 1/48 got more options for available aircraft models.
But, I stayed with 1/72 up to today for the same reason that I always built and drove the same Car Company's hot rods. It is hard to get rid of all of the spares for one make of car to switch makes, especially if you have some really cool and rare parts.
The same thing would have happened if I "jumped" up to 1/48 or 1/32. Only some little bits of the decals I have would possibly be of any use in a different scale, spares box and vehicles, weapons packs,,,,etc, etc,,,,,all of no use in a different scale.
A lot of people are convinced that their viewers are more impressed with the large models, and I believe that is true to an extant.
But, I revel in the idea that people say things like "you built that itty bitty thing?" when they see a 1/72 jeep, jet, bearcat, or people walking around on a flight deck base.
Re: A question of scale?
No real reason to prefer 1/48 or 1/32 over the smaller scales except for the size of the item. My fingers do not like (never have) the really tiny stuff.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
- speedgraflex
- Moderator
- Posts: 11401
- Joined: Fri Feb 10, 2017 11:08 pm
- Contact:
Re: A question of scale?
I am not Portman but I really appreciate reading your posts, gents. Often I am reminded that our reasons for choosing a scale are quite elegantly reasoned.
Make more models!
Re: A question of scale?
I think there have been some great answers gents and it's been really interesting to see why people do what they do.
I personally only build in 1/72 because that's what I've always done, and that's the scale of a lot of the older kits that I like to build. However I much prefer the look of a 1/48th kit and if I could rewind time that's the way I would have gone.
I personally only build in 1/72 because that's what I've always done, and that's the scale of a lot of the older kits that I like to build. However I much prefer the look of a 1/48th kit and if I could rewind time that's the way I would have gone.
Stuart Templeton 'I may not be good but I'm slow...'
- Stikpusher
- Moderator
- Posts: 21225
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: A question of scale?
That is so true... I had tons of 1/48 ground stuff and spares from Bandai, and loads of 1/72 decals in my stash when I got home from the Army and went with my 1/48 Air-1/35 ground stuff. I got rid of it all...RexCag wrote:
The same thing would have happened if I "jumped" up to 1/48 or 1/32. Only some little bits of the decals I have would possibly be of any use in a different scale, spares box and vehicles, weapons packs,,,,etc, etc,,,,,all of no use in a different scale.
One of the former officers in our IPMS Chapter told me as such. If one is looking to win the contests, build something big. Not so much scale, as just overall size gets the notice, after all the basics of construction and finish are considered.RexCag wrote:
A lot of people are convinced that their viewers are more impressed with the large models, and I believe that is true to an extant.
But, I revel in the idea that people say things like "you built that itty bitty thing?" when they see a 1/72 jeep, jet, bearcat, or people walking around on a flight deck base.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
- Thomas_M
- Admin
- Posts: 4244
- Joined: Fri Dec 13, 2013 9:43 am
- Location: Bad Wurzach - Germany
- Contact:
Re: A question of scale?
What a coincidence! I recently got myself an 1/35 scale Blackhawk from Academy...Stikpusher wrote:...A large scale Apache or Blackhawk has a very large display footprint with those rotors.
One could build those without rotor blades, as in flight...
- speedgraflex
- Moderator
- Posts: 11401
- Joined: Fri Feb 10, 2017 11:08 pm
- Contact:
Re: A question of scale?
Yes, please!!!!Thomas_M wrote:What a coincidence! I recently got myself an 1/35 scale Blackhawk from Academy...Stikpusher wrote:...A large scale Apache or Blackhawk has a very large display footprint with those rotors.![]()
One could build those without rotor blades, as in flight...
Make more models!
- Medicman71
- Elite Member
- Posts: 11316
- Joined: Mon Apr 07, 2014 9:32 am
- Location: Houston, Tx
Re: A question of scale?
Kitty Hawk is making a whole line of Blackhawks. I've seen CAD renderings of the Pavehawk, Blackhawk and Seahawk so far.
Mike
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
- Stikpusher
- Moderator
- Posts: 21225
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: A question of scale?
Yes, I have the 1/35 Academy MH-60 kit. I would like to perhaps get their Air Force version and possibly an Army UH-60 in 1/35 as well. I do love my Hawks.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM